If your iPhone 13 has a cracked camera lens, don’t worry! You can fix it with a few simple steps. Here’s what you need to know.
Why Fix a Cracked Lens?
A cracked lens can cause blurry photos and videos. It can also let dust and moisture inside your phone. Fixing it will help you take clear pictures again.
What You’ll Need
- A replacement lens (you can buy this online)
- A small screwdriver
- A suction cup tool
- A plastic pry tool
- A microfiber cloth
- Optional: adhesive glue
Step-by-Step Guide
- Power Off Your iPhone
Always turn off your phone before starting any repair. - Remove the Back Cover
- Use the screwdriver to remove the screws near the charging port.
- Carefully use the suction cup to lift the back cover.
- Use the plastic pry tool to help loosen it gently.
- Access the Camera Module
- Once the back cover is off, locate the camera module.
- You may need to remove a few screws around the module to take it out.
- Take Off the Cracked Lens
- If the lens is glued, use the pry tool to carefully remove it.
- Be gentle to avoid damaging the camera.
- Install the New Lens
- Place the new lens in the same spot.
- If needed, apply a small amount of adhesive to hold it in place.
- Reassemble Your iPhone
- Carefully put the camera module back in.
- Replace the back cover and tighten the screws.
- Power On Your iPhone
Turn your phone back on and check the camera. Take a few test photos to make sure everything is working well.
When to Seek Help
If you feel uncomfortable doing the repair yourself, it’s best to take your iPhone to a professional. They can fix it safely and ensure everything works properly.